ISCOM6800, A Powerful Next-generation xPON OLT Device

Raisecom uses the FTTx as the next-generation broadband access solution and provides customers with  many other solutions for EPON or GPON access technology, such as FTTH, FTTB and FTTC. Raisecom also offers a high performance FTTx product line, including ISCOM5508, ISCOM5800E, ISCOM6800, ISCOM6508, ONUs, MDU ONUs and MSGs.

ISCOM6800 is a next generation xPON OLT device,  designed for incumbent carriers. Firstly, it can support IEEE802.3ah EPON, IEEE802.3av 10G EPON and ITU-T G.984(GPON) standards and can also offer benign flexibility and high density in delivering triple-play services to homes. Secondly, with the consummate xPON platform, operators can quickly deploy EPON, 10G EPON, GPON services, as well as easily cater to hybrid GPON or EPON requirements. Since EPON will inevitably evolve into 10G EPON, 10G EPON card will allow a smooth access  to the existing ODN. Moreover, the intelligent ISCOM6800-CICA guarantees a real-time system monitoring and the hot-swappable redundant power supply makes the maximum network uptime. Finally, the modular design allows the lowest initial CAPEX and TCO to work normally.


• Available with mixed pluggable 16xGE, 4x10GE interfaces for uplink and 16PON ports for downlink

• Support 2xSMC control module supporting real-time redundancy

• Support up to 1:64 split ratio, 20km transmission distance and 14,336 ONUs per full-load OLT chassis

• Support upstream wavelength of 1310nm and downstream wavelength of 1490nm

• Support ITU-T G.8032

• IEEE 802.3av (10G EPON)

• Symmetrical 10G/10G or asymmetrical 10G/1G

• Support storm control of broadcast, multicast and DLF

• Support trunk group and Link Aggregation Control Protocol (LACP)

• Support 1+1 automatic protection and link diagnostic for each PON port

• Support VLAN, QinQ, QoS, DBA and assured SLA

• Support IEEE802.3ah/802.1ag, ITU-T Y.1731/G.984

• Support IGMP, Multicast VLAN Registration (MVR), DHCP and Option 82

• Support AES-128 encryption and triple churning

• Hot-swappable redundant power supply

• SSHv2, Telnet, CLI and SNMP (NView compatible)